Chilcott’s Ck bridge transoms …

Hi all,

After the recent boost in my enthusiasm following the 45 class weathering, I decided to recommence work on the bridge over Chilcott’s Creek.

Following on from the weathering of the girders, I had been thinking of ways to attach the bridge transoms to the girders.

I have decided to use timber transoms, using Kappler Scale Lumber 10” x 6” stripwood, which were then cut to a length of nine scale feet.

These were then stained with some AIM Quick-Age weathering solution.

I had to come up with a way of locating the transoms on the girders and to ensure they are aligned centrally.

I decided to glue a small piece of stripwood on the underside of each transom so it would butt up to the inside edge of the girder.

I made a simple jig to hold a transom and to locate the piece of stripwood which was 6mm from one end.

Transom girder jig

Transom girder jig

Transoms

Transom in situ

 

The next stage is to glue the transoms to the girders and then to attach tieplates to the transoms.

Cheers.

Advertisements

Posted on September 5, 2015, in Chilcott's Ck, Trackwork and tagged , . Bookmark the permalink. Leave a comment.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: