More track laid & scenery continues at Kankool …
Since the last post, I have continued with the laying of rail from Kankool towards the bridge at Chilcott’s Creek and also for a couple of metres towards Ardglen.
This had come to a bit of a standstill due to me running out of the 3D printed fishplates a couple of months ago, but I have since come up with a new plan to allow tracklaying to progress independent of my stocks of fishplates.
I have started to paint the non-viewable side of each rail with the Krylon camo brown prior to fixing to the CV ties. There is no need to have fishplates on the non-visible side of the rail. That being said, I did fix them to both sides of the rail on the main and loop roads at Kankool, but only realised it was a waste after the fact! Once the half-painted rail is fixed down, I will then go along and glue the fishplates to the viewable side of the rail and then spray the whole track, including the CV ties, with the Krylon. I think this will aid in colouring and weathering the CV ties later on.
Over the last few months, in between other jobs, I started to glue down copious amounts of the XPS yellow foam in readiness to begin shaping the landform in the section from Chilcott’s Creek and through Kankool.