Ballasting at Kankool
I have recently started applying dirt and ballast around the turnouts at the Werris Creek end of Kankool. The picture below shows the initial application prior to gluing. The ballast tends to darken once glued, but I have been going over it again, once dry, with either pastels, grouts or dirt to lighten up again.
The section of track curving away in the upper right hand corner is the “run-off” from the loop on the falling grade. It is essentially a catchpoint protecting the main line. This short section will be modelled as overgrown with grasses and not much ballast.
Sleepers and rail have been weathered using pan pastels. The track has previously been sprayed with Krylon Camo Brown, and the pastels take to it nicely. In the picture below, you can see the difference between the weathered and non weathered section of track. You can see the difference in the rail colour at the extreme left.